Global Distributor Recruitment | Create the Future of Battery Testing Together
NEWARE technologies learning center
Previous
Next
Disconnected with tester or control unit and cannot be operated.
Time when the device is powered on and the value displayed on the device is displayed.
Implement charge and discharge protection for a series battery pack to ensure that the voltage difference between individual cells is below a set limit, and achieve uniform charging of each cell in the battery pack.
Multiple battery test channels are connected in parallel to increase the allowable test current of the channels.
Charge with a constant voltage.
Four-wire connection is a circuit connection method commonly used for measuring voltage and current in a circuit. It utilizes four wires for the connection, consisting of two voltage leads and two current leads.
May 14,2024
October 11,2019
ABAA 12 - International Conference on Advanced Lithium Batteries for Automobile Applications 12 was held in Ulm, Germany from 06 to 09 October 2019.
September 16,2019
The Battery Show North America 2019 and Electric & Hybrid Vehicle Technology Expo took place September 10-12 at the Suburban Collection Showplace in Novi, Michigan.
June 04,2023
The World Congress of Chemical Engineering (WCCE) is organized by the World Federation of Chemical Engineering (WCEC) every four years, alternating between Europe, America and Asia, and is a global co
November 18,2019
The 60th Battery Symposium was held in Kyoto International Conference Center, Japan from November 13 to 15, 2019.
December 06,2022
The 48th Solid State Ion Symposium will be held in Sendai, Japan, from December 6 to December 8, 2022.