Global Distributor Recruitment | Create the Future of Battery Testing Together
NEWARE technologies learning center
Previous
Next
The process of removing moisture from the bare cell by controlling the equipment's heating rate, temperature, vacuum level, and duration to ensure that the water content in the cell meets the design requirements.
The process of longitudinally slitting the incoming film into multiple sections and winding them into upper and lower single rolls with a specified width.
The process involves pressing the plastic sheet or film to be welded between two heating elements. A high electric current is applied to the heating element, causing it to generate intense heat in a very short time. Subsequently, cooling is applied. During this process, the welding surfaces melt together under the combined effect of heat and pressure, achieving a sealed or fixed connection.
The process of grouping batteries based on their overall performance characteristics such as capacity, voltage, internal resistance, etc., in order to ensure consistency among the batteries.
The process of transferring the prepared slurry to the coating head.
The coating method involves the relative rotation between the coating roller and the back roller, allowing the coating slurry to be transferred from the coating roller to the substrate indirectly through the tension of the liquid, forming a coated liquid film on the substrate.
September 12, 2022
The 17th Asian Conference on Solid State Ionics (ACSSI) opens on 12th - 15th September, 2022 in Nagoya, Japan.
March 29, 2023
From 27 to 29 March 2023, the 90th Annual Meeting of the Electrochemical Society of Japan is in Sendai, known as the "capital of trees".
September 26, 2022
The 2022 MRS Fall Meeting will be held November 27 – December 2, 2022, in Boston, Massachusetts, at the Hynes Convention Center and adjacent Sheraton Boston Hotel, and then December 6 – 8 in a virtual format.
September 08, 2024
Nova Scotia has a growing battery technology cluster comprised of academic researchers at Dalhousie University and innovative industry players that are actively involved in the development of advanced battery technology. The IBA 2024 Annual Meeting in Halifax, NS, will be an ideal opportunity to link your organization with world-wide renowned battery researchers in a new center for battery R&D and to discuss exciting ideas in fundamental battery materials research and practical applications.
June 23, 2024
Welcome to The International Symposium on Polymer Electrolytes (ISPE-18)The International Symposium on Polymer Electrolytes (ISPE-18) Conference is organized by the American Chemical Society (ACS) Mal
June 04, 2023
The World Congress of Chemical Engineering (WCCE) is organized by the World Federation of Chemical Engineering (WCEC) every four years, alternating between Europe, America and Asia, and is a global co
