Incomplete channel display on BTS client interface

Latest updated: Mar 25,2024

The reason for incomplete display of the number of main channels, no channel display or offline channel display may be that the channels have not reset the mapping. You need to reset the mapping when you connect a new device or replace a device with an inconsistent channel count. Or verify the number of valid channels in the calibration software, whether it is consistent with the actual equipment, modify and restart, and then reset the mapping.
Auxiliary channel number display is incomplete or no display, you can check the display icon in the lower right corner of the BTS interface to confirm whether it is hidden or not.

· Related FAQ

Mar 27,2024

How to set up disk full alerts?

To set up disk full alerts, follow these steps:

Aug 17,2023

How to set and free parallels

Attention: 1.Channel parallel support only 50A or higher devices. 2.The current range after parallel is the sum of the ranges of each channel. 3.All positive sampling lines and all negative sampling lines of the parallel channel are connected separately. It is then used as the positive and negative lines of the parallel channel.

Dec 15,2023

How to resume testing after replacing the computer and reinstalling the software

After replacing the computer, if you need to resume testing, you should copy the client and server files installed on the original computer to the new computer, and ensure the installation discs are consistent.

Aug 01,2023

How to display the devices under different control unit in one interface

You need to use the mapping to the virtual control unit. In BTSV, combine two control unit into one virtual control unit, and the channels below the control unit will be displayed on the control unit.

Mar 25,2024

The buzzer alarm in the lower right corner of the BTS client interface cannot be

In the lower right corner of BTS interface, beep alarm interface, all options are unchecked, turn off the computer sound, check "none", that is, do not use the external alarm.

September 26,2022

Boston, Massachusetts

The 2022 MRS Fall Meeting

The 2022 MRS Fall Meeting will be held November 27 – December 2, 2022, in Boston, Massachusetts, at the Hynes Convention Center and adjacent Sheraton Boston Hotel, and then December 6 – 8 in a virtual format.

October 29,2023

Ho Chi Minh City, Vietnam

International conference on Advanced Li-Batteries for Automobile Application

Over the past decade, the electric vehicle industry has flourished due to market demand for "green" cars, zero emissions, and a fast yet quiet driving experience.The international conference on Advanced Lithium Batteries for Automobile Applications (ABAA) was initiated in 2008 with the aim of promoting global R&D on advanced electric vehicles, facilitating discussions and communication on scientific experiments, and fostering global cooperation.