Temperature deviation in the temperature chamber (temperature instability)

Latest updated: Dec 18,2023

Solution 1: Clean the temperature chamber cooling fan of dust. Remove the bottom baffle of the unit and clean the condenser dust. Needs to be cleaned every three months.

Solution 2: If still not solved may need to replace the heat pipe, need to be further confirmed by the technician, it is recommended to contact the after-sales processing.

· Related FAQ

Dec 18,2023

There are water droplets inside or on the surface of the incubator

It may be due to the heating element of the chamber not functioning properly, requiring inspection or replacement.

Dec 18,2023

The temperature of the temperature chamber rises slowly or fails to rise to the

Need to confirm whether the electric heating tube is energised normally, to determine whether the electric heating tube is burnt or damaged by the damage of the electrical components.

Dec 18,2023

Loss of temperature control in the incubator

There are upper limit setting temperature, lower limit setting temperature and independent over-temperature protection on the temperature chamber controller.

Dec 18,2023

Temperature chamber communication is not working

1. Check the wiring sequence. 2. Check the environment configuration. 3. Check the version information.

Dec 18,2023

The temperature chamber cooling speed is slow or can not fall to the set tempera

It is necessary to confirm whether the refrigeration unit is electrified for normal operation, and check whether the compressor can operate normally.

Dec 18,2023

Introduction to Environmental Test Chamber

What is a humidified temperature chamber? Humidification type temperature chamber is a temperature chamber that controls humidity within a certain range. In the equipment code, H stands for humidification model.

May 14,2024

Strasbourg·France

AABC EUROPE 2024

November 18,2019

Kyoto, Japan

The 60th Battery Symposium in Japan

The 60th Battery Symposium was held in Kyoto International Conference Center, Japan from November 13 to 15, 2019.

September 26,2022

Boston, Massachusetts

The 2022 MRS Fall Meeting

The 2022 MRS Fall Meeting will be held November 27 – December 2, 2022, in Boston, Massachusetts, at the Hynes Convention Center and adjacent Sheraton Boston Hotel, and then December 6 – 8 in a virtual format.

International Battery Materials Association2024-NEWARE

September 08,2024

Saint Mary's University·Canada

IBA2024

Nova Scotia has a growing battery technology cluster comprised of academic researchers at Dalhousie University and innovative industry players that are actively involved in the development of advanced battery technology. The IBA 2024 Annual Meeting in Halifax, NS, will be an ideal opportunity to link your organization with world-wide renowned battery researchers in a new center for battery R&D and to discuss exciting ideas in fundamental battery materials research and practical applications.