The temperature of the temperature chamber rises slowly or fails to rise to the

Latest updated: Dec 18,2023

Need to confirm whether the electric heating tube is energised normally, to determine whether the electric heating tube is burnt or damaged by the damage of the electrical components. Then check whether the door of the test chamber, test holes and explosion-proof pressure relief port is tightly closed or well closed.

· Related FAQ

Dec 18,2023

Loss of temperature control in the incubator

There are upper limit setting temperature, lower limit setting temperature and independent over-temperature protection on the temperature chamber controller.

Dec 18,2023

Introduction to Environmental Test Chamber

What is a humidified temperature chamber? Humidification type temperature chamber is a temperature chamber that controls humidity within a certain range. In the equipment code, H stands for humidification model.

Dec 18,2023

Temperature chamber communication is not working

1. Check the wiring sequence. 2. Check the environment configuration. 3. Check the version information.

Dec 18,2023

There are water droplets inside or on the surface of the incubator

It may be due to the heating element of the chamber not functioning properly, requiring inspection or replacement.

Dec 18,2023

Temperature deviation in the temperature chamber (temperature instability)

Clean the temperature chamber cooling fan of dust. Remove the bottom baffle of the unit and clean the condenser dust. Needs to be cleaned every three months.

October 29,2023

Ho Chi Minh City, Vietnam

International conference on Advanced Li-Batteries for Automobile Application

Over the past decade, the electric vehicle industry has flourished due to market demand for "green" cars, zero emissions, and a fast yet quiet driving experience.The international conference on Advanced Lithium Batteries for Automobile Applications (ABAA) was initiated in 2008 with the aim of promoting global R&D on advanced electric vehicles, facilitating discussions and communication on scientific experiments, and fostering global cooperation.

September 16,2019

Novi, Michigan, US

The Battery Show North America 2019

The Battery Show North America 2019 and Electric & Hybrid Vehicle Technology Expo took place September 10-12 at the Suburban Collection Showplace in Novi, Michigan.

September 26,2022

Boston, Massachusetts

The 2022 MRS Fall Meeting

The 2022 MRS Fall Meeting will be held November 27 – December 2, 2022, in Boston, Massachusetts, at the Hynes Convention Center and adjacent Sheraton Boston Hotel, and then December 6 – 8 in a virtual format.

11th World Congress of Chemical Engineering(WCCE 11)

June 04,2023

Buenos Aires, Argentina

11th World Congress of Chemical Engineering(WCCE 11)

The World Congress of Chemical Engineering (WCCE) is organized by the World Federation of Chemical Engineering (WCEC) every four years, alternating between Europe, America and Asia, and is a global co

July 03,2024

Bangkok·Thailand

ASEAN Sustainble Energy Week

ENERGY STORAGE ASIA 2024, featured prominently at ASEAN SUSTAINABLE ENERGY WEEK, will serve as a hub for cutting-edge energy storage technologies from leading brands worldwide. It offers a unique opportunity for industry professionals to connect with high-quality suppliers, catering to the energy sector, and even the electric vehicle industry. This show is set to be a pivotal platform for industry players to explore new opportunities and collaborations in the dynamic energy landscape.

March 21,2022

Tokyo, Japan

BATTERY JAPAN 2022

BATTERY JAPAN is world's leading international exhibition for rechargeable battery, showcasing various components, materials, devices for rechargeable battery R&D and manufacturing, and finished rechargeable batteries.