The humidifier of the incubator does not work, resulting in the temperature insi

Latest updated: Dec 18,2023

1. Need to confirm whether the humidifier heater is working properly.

2. Need to confirm whether the humidification system is short of water, such as water shortage need to promptly replenish the equipment required water quality (deionised water or pure water) water.

· Related FAQ

Dec 18,2023

Temperature deviation in the temperature chamber (temperature instability)

Clean the temperature chamber cooling fan of dust. Remove the bottom baffle of the unit and clean the condenser dust. Needs to be cleaned every three months.

Dec 18,2023

There are water droplets inside or on the surface of the incubator

It may be due to the heating element of the chamber not functioning properly, requiring inspection or replacement.

Dec 18,2023

Loss of temperature control in the incubator

There are upper limit setting temperature, lower limit setting temperature and independent over-temperature protection on the temperature chamber controller.

Dec 18,2023

The temperature chamber cooling speed is slow or can not fall to the set tempera

It is necessary to confirm whether the refrigeration unit is electrified for normal operation, and check whether the compressor can operate normally.

Dec 18,2023

The temperature of the temperature chamber rises slowly or fails to rise to the

Need to confirm whether the electric heating tube is energised normally, to determine whether the electric heating tube is burnt or damaged by the damage of the electrical components.

September 20,2022

Atlanta, GA, USA

242nd ECS Meeting

The 242nd ECS Meeting takes place in Atlanta, Georgia, from October 9 to October 13, 2022, at the Hilton Atlanta.

May 14,2024

Strasbourg·France

AABC EUROPE 2024

August 05,2024

Carolina·United States

2024 Battery Safety Workshop

With the wide application of batteries in our current mobile society, the safety issues of batteries have become one of the top concerns. Emerging in-situ/operando characterizations, advanced experimental approaches, and modeling methodologies have been proposed to enhance understanding of the fundamental science of battery safety behaviors and provide powerful design tools for the next-generation safe battery.

11th World Congress of Chemical Engineering(WCCE 11)

June 04,2023

Buenos Aires, Argentina

11th World Congress of Chemical Engineering(WCCE 11)

The World Congress of Chemical Engineering (WCCE) is organized by the World Federation of Chemical Engineering (WCEC) every four years, alternating between Europe, America and Asia, and is a global co

April 22,2024

Seattle·Washington

2024 MRS Spring Meeting and Exhibit

2024 Materials Reaserch Society Spring Meeting & ExhibitTime and time again, multidisciplinary research is touted as essential to innovation. That is why, from April 22-26, 2024, researchers working i

March 21,2022

Tokyo, Japan

BATTERY JAPAN 2022

BATTERY JAPAN is world's leading international exhibition for rechargeable battery, showcasing various components, materials, devices for rechargeable battery R&D and manufacturing, and finished rechargeable batteries.