Abnormal capacity decay

Solution 1: The device does not come with a negative power supply and should not be discharged to 0V or discharged with constant current at low voltage. Check if the settings are incorrect.
Solution 2: Check if the device version and client version are the same.
Steps to view the client version: Open the BTS8.0 software, right-click and select "View Channel Information" → you can see "Server Version" and "Client Version".

Solution 1: The interference may be caused by electrostatic conduction between temperature line probes. Please redo the insulation treatment and wrap the temperature probes with insulating tape to solve the issue.
Solution 2: It may be necessary to replace the power cord.

Solution 1: In order to ensure the normal export of curves, users need to install Excel version 2010 or higher.

Solution 1: Check the process settings (voltage and current upper and lower limits) to ensure they are reasonable.
Solution 2: The equipment needs to be recalibrated.

Issue description: In testing devices of the same model, the impact on capacity after a 9-hour stoppage is less than 1%, while the impact on capacity after a power outage followed by restoration is as high as 4%.

It may be caused by Excel version incompatibility. Please try again after changing the Excel version.