Some individual channels display "long-time sampling data error"

You can try restarting the computer first to resolve the issue. If the problem is not resolved, please upgrade the client-server. If you are unsure how to upgrade the client-server, please contact the after-sales department.

Restart the control unit (restart the device), wait until the control unit screen is completely off, and then turn it on again.

Solution 1: End the channel status before power-off, and then restart the channel.
Solution 2: It may be caused by database damage, and a script is needed to repair the database. Please contact the after-sales department for database repair.

Solution 1: Current Setting Too Low - Please check if the set current is too low and has gone below the minimum range of the device.

It may be caused by incorrect initial step settings or poor battery contact.
Please check if the initial step settings are correct and ensure that the fixture has good contact with the battery.

Check the computer's running memory, end processes occupying memory, and ensure that the memory usage rate does not exceed 90%. After disabling the firewall and antivirus software, restart the software. If the issue persists, then reinstall the software. Before reinstalling, please uninstall or disable the firewall and antivirus software.