Slow charging response time

Facing the issue of full disk space on your server and need to relocate your database to a new disk? Follow this step-by-step procedure to ensure a seamless transition:

Check the Ethernet cable and Ethernet port for good contact, shut down the device for 20 minutes, restart the device, and restart the computer.

Solution 1: Check if the network cable and port are well connected. Solution 2: Restart the host computer, change the boot sequence (start the lower computer before the host computer), and then remap.
Remapping correction plan: If the mapping is incorrect while the channel is in the running state and cannot be reset, first pause the channel, save the data, then right-click and select "Clear Flag," enter "Mapping Settings," right-click and select "Undo Current Channel," then remap the channel and save the mapping.
Solution 3: Modify the equipment box number through calibration software/box number modification software (please contact after-sales support to resolve the issue).

Solution 1: Check whether the network cable/ethernet port connection is poor.
Solution 2: Power off for 20 minutes, then restart the device and computer.

Solution 1: Check if the fixture has poor contact, readjust or replace the fixture as needed.
Solution 2: Re-calibrate the equipment. For calibration, please contact the after-sales department to resolve.